Wheels

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal wheel magnets work with any speed sensor - Thread-on speed magnet is positioned closer to the sensor for improved signal - Aero speed magnet provides a sleek, low-profile, aerodynamic solution

The all-new CXR 2 gravel WheelSystem showcases Giant's prowess in building strong, lightweight carbon wheels. Through improved carbon layup, innovative hookless technology, and a large inner rim width that allows for wider tires and lower pressures, the CXR 2 is as strong as our XCR cross-country mountain bike wheel but at a much lighter weight. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high-tensile strength carbon fiber placed at the most crucial structural points to provide stiff, compliant, and lightweight wheels - A 35mm all-round rim profile with a contemporary wider inner width (25mm) offers improved support for today's higher volume road and gravel tires

Your riding doesn’t need to stop when the weather gets cold. Features - Giant road thru-axle trainer axle - Alloy construction - For use on 2017+ Giant road bikes with a 142x12mm rear thru-axle

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061

Weighing less than 1500g per set, Paradigm wheels deliver a combination of top-performance and superb ride quality with a 19.5mm width, DT 240 internals with an 18-tooth free hub, and a great weight-to-stiffness ratio. - Stacked Lacing provides a better spoke bracing angle for a stiffer wheel - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Offset spoke bed reduces wheel dish for stiff and stable performance - 6061 alloy rim 25mm outer, 19.5mm inner width, DT Swiss hubs - Shimano 10/11, SRAM 10/11, Campagnolo (freehub sold separately) - Includes Tubeless Ready (TLR) rim strip, TLR valve stem, internal cam quick release - No rider weight restrictions

Enduro riders push the limits of traction. The E 1900 SPLINE is the ideal wheel for this purpose with its 25mm wide, extra-strong aluminum rims and solid wheel construction. Weight-saving details such as the extensively machined hubs and the spherical DT Squorx aluminum nipples will keep you smiling in the uphills too. After all, the best trails are rarely found right next to the chairlift.

- Shell: 8mm flanged axle nut - Flanged

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Kit allows you to convert your Neo or Neo Ultimate hub. The thru-axle to QR kit includes two SealLock end caps and Stan's aluminum quick-release skewer. SealLock end caps feature a low-friction U-cup seal that snaps into place and stays secure even when your wheel is removed from your bike. The QR/thru-axle to bolt-on kit includes end caps, threaded axle, bolts and washers. Bolt-on axles are recommended to prevent slipping and wheel misalignment in frames with horizontal drop-outs. - Not compatible with Centerlock or Boost hubs

Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Grade 10 chromium steel balls

This replacement axle for Stan's 3.30 or 3.30Ti rear hubs gets you back on the bike where you belong. CHoose the corrct size for your frame interface.

Stan's Flow Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping." Plus, you won't miss dealing with flat tires and you'll save money on tubes!

The Crest sets the benchmark for XC tubeless performance. Years of refinement and victories in some of the most prestigious races in the world have created a rim that's lighter and stronger by design. Stan's patented lower-profile Bead Socket Technology offers an easy and reliable tubeless seal for decreased rolling resistance, less weight, and superior traction. One ride makes it clear why the best racers around the world choose the Crest (even when they're sponsored by someone else). Faster, lighter, easier, and more reliable, the Crest rim with Neo hubs is the ultimate XC tubeless wheelset. What’s Included: Crest wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - For cross country riding and racing - Industry standard durable, lightweight rims - Bead Socket Technology (BST) for superior tubeless performance - Wider rim cavity increases tire volume for faster rolling, better traction, and improved cornering - Stronger and lighter low-profile sidewalls for quicker acceleration - Compatible with standard tires when used with or without tubes

If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut

- Replacement straight pull spokes for Zipp 88 (Front) and 188 (Rear) Hubs

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Upgrade or refresh your bike. - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement parts for Bontrager hubs using the DT 240 platform - For use with all Bontrager rim-brake wheels with DT 240 hub internals - Includes Campagnolo-specific end cap

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement parts for Bontrager hubs using the DT 240 platform - Compatible with all Bontrager wheels with DT 240 hub internals - Includes 11-Speed specific 5mm quick-release end cap

Stan's Standard Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Affinity TLR 24H wheels - Alloy double-wall rim with 21mm internal, 26mm external width, 24 hole fr/r - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Zipp Speed Weaponry Rear Axle Conversion Kit - Not to be used on 188 V6 or earlier rear hubs - Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 9.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M750, 9-spd Rear - XT M760, 9-spd Rear - XT M765, 9-spd Rear - Deore LX M570, 9-spd Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M737, 8-spd Rear - STX-RC MC38, 8-spd Rear - STX/STX-RC MC30/32/33, 7-spd Rear - Alivio MC18, 8-spd Rear - Alivio MC12, 7-spd Rear - Acera-X MC290, 7-spd Rear - Altus RM-40, 7-spd Rear - FH-R080 Silent Hub, 8-spd Rear - FH-R050 Silent Hub, 7-spd Rear

Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!

- Variable widths - Left: 30.5mm - Center: 52mm - Right: 30.5mm - Length: 113mm - Overall: 134mm

- Replacement steel quick release skewers

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

- AL6061 alloy tubeless Presta valve - Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim - Removable valve core for installing sealant - Additional replacement valve cores sold separately - Sold individually

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

- Rim brake only - Sealed bearing hubs (QR 100) - Dynamic Balanced Lacing technology - Tubeless Ready rim - Does not include QR, tape, or tubeless components

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately

Replacement Axle nuts for three speed Sturmey Archer hubs.

• 5-sided key locking skewer set • Chromoly axles • 6061 anodized aluminum • Includes seat and F+R wheel skewers • 95g (set)

The SLR 1 42 WheelSystems are efficient, lightweight, all-around, carbon road wheels that bring premium-level performance to all riders. Featuring hookless rim design and optimized carbon layup to ensure a robust yet lightweight structure, contemporary wider inner width, low friction hubs offering low rolling resistance, and Dynamic Balanced Lacing (DBL) technology to maintain maximum power efficiency, the SLR 1 42 and SLR 1 42 Disc bring outstanding performance at no compromise. - Hookless rim design enhances overall durability and offers a wider inner rim width without adding weight - Optimized carbon layup features high tensile strength carbon fiber placed at the most crucial points to provide stiff, compliant, and lightweight wheels - Low friction hub with precision machined internals eliminates excessive bearing load, reducing bearing friction, lowering rolling resistance, and minimizing power loss - Dynamic Balanced Lacing (DBL) ensures spokes are set for optimal tension when pedaling, resulting in enhanced durability and transmission efficiency - The enlarged DBL hub flange increases spoke bracing angles, boosting overall torsional, transmissional, and lateral stiffness for better power transfer - Giant's proprietary High Glass Transition Temperature (Tg) resin enhances the rim's overall durability and braking performance - 42mm-deep all-round rim profile with an updated inner width offers better support for today's higher volume road tires

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS A practical wheel that won't break the bank. PRODUCT DETAILS - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual

Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick

Origin-8's Pro Pulsion Rim Strips are made from a super-durable, environmentally friendly PVC material.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag

High-quality replacement skewer to keep the bike moving. - ABP Race skewers only work with ABP Race and ABP Convert 135x5 QR equipped bikes - External cam

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed

Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

Shimano's Ultegra Hubs are flag-bearers for high-durability, smooth-rolling performance. Hardened steel cup-and-cone design use stainless steel bearings for minimal drag and superior ease of maintenance. Shimano's Digital Adjustment System makes hub maintenance fast, simple, and reduces axial force on the bearings, reducing wear and tear on the hub internals.