Parts

This is a set of universal, removable brake hardware for WeThePeople bikes. Did you lose yours after you took it off? Yeah, we did, too.

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Enduro 24x37 ceramic hybrid sealed bearing for 24mm crank spindle applications. Direct OEM replacement for most BB86/92, Trek BB90/95, and with all Wheels Mfg. PF30 outboard, BB30 outboard, and BSA threaded bottom brackets. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

The product that set the standard and still the best available! The GC line of cassette extender cogs allow you to modify your 10-speed cassette into a wide range cassette. To achieve the optimal shifting, the GCs are optimized for Shimano or SRAM cassette so always select the correct type for the cassette brand you have. Compatibility: - Compatible with SRAM 10-speed cassettes listed on the GC tech page - Compatible with all 10-speed chains - Note that you may need a longer chain that you currently have on your bike - Chain stretch should be less than .5 when installing a new GC - Compatible with all 10 speed rear derailleurs except non-clutch type SRAM rear derailleurs model year 2012 and older - These older rear derailleurs do work with the GC40. - Can be run in 2x configuration with a long cage rear derailleur - These may fit tightly on some over-sized hub bodies such as Stan's No Tubes 3.30 and the Easton X4 hubs. With a little filing and some grease they will go on.

Replacement CINCH Preload Ring for non-driveside Race Face CINCH cranks

- High performance compounds recommended for all-conditions - Steel backing

Make sure your fit is dialed in your race against the clock! Bontrager's Speed Concept Stem allows you to set up your Speed Concept bike for proper ergonomics and aerodynamics. Plus, the precisely integrated design keeps your super aero bike fast and looking pro! - Low-Near = 17° rise / 77mm length - Low-Far = 100° rise / 110mm length - Mid-Near = 50° rise / 67mm length - Mid-Far = 45° rise / 110mm length - High-Near = 80° rise / 67mm length - High-Far = 75° rise / 110mm length

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Front, Not applicable - Mounting location: Front - Attachment: 2-bolt

Light and stiff alloy stem, with Blendr accessory integration that is at home on the road or mountain bike. The smarter upgrade The forged alloy construction means you'll get the stiffness you demand but in a weight that'll make others jealous. - Pro-level quality 31.8mm clamp diameter stem weighs less than many carbon stems - 4-bolt dual band clamp securely holds handlebar - Uses high-quality M5 corrosion-resistant faceplate bolts with 5.2Nm torque spec - Integrate accessories with included Blendr Pro base and Blendr XXX accessory mounts - Mounts intended for use with Ion and Trip, Garmin, GoPro and SRM accessories - Approved for carbon bars and steerer tubes - Safe installation requires 5mm spacer above and below stem - Go green and save green - Zero packaging means zero waste and zero extra cost

Shimano Dura-Ace BB92, BB9000 Hollowtech II Bottom Brackets

- Universal design - Use: Fits single rail

Slick compressionless gear cable/housing kits offer smooth, fast, accurate, and reliable shifting Kits include: - 4mm pre-lubed, Kevlar-lined, compressionless gear housing - 1.1mm stainless steel die-pulled and polished slick gear cable(s) with SRAM/Shimano compatible head(s) for both MTB and Road applications - Alloy sleeve ferrules - Alloy O-ring ferrules - Cable donuts - Spiral frame protector(s) - Cable tip(s)

Top quality design and materials in sizes to fit modern road and 'cross bikes. - 7000 series aluminum provides strength and durability - 52t for use with 36 or 38t - 50t for use with 34t

Lightweight, reliable XC mountain bike pedals with double sided SPD compatible engagement, sealed cartridge bearings and adjustable release tension. - Dual-side Shimano SPD compatible engagement. - Widely adjustable release tension. - Lightweight CNC machined aluminum body. - Stout Cr-Mo spindle. - Sealed bearings. - Optimal mud shedding cage design. - Includes cleats and mounting hardware.

Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.

Origin-8's Pro Cork Handlebar Tape is made from real cork and features an adhesive backing. The tapered edge gives you a smooth, comfortable wrap that feels wonderful. And, you'll also get a set of handlebar plugs to finish the job.

When you have Cloud 9's Ladies' Comfort Gel Seat on your bike, you might just think you're sitting on the couch when you're out enjoying the countryside or pedaling to the office. The extraordinary comfort is a result of Cloud 9's dual-density gel padding that's soft on top and firmer below for support. You'll also love the pressure-eliminating cutout on top and vibration-canceling springs in the base. - 10" long x 8" wide - Multi-stage foam - Anatomic relief design - Elastomer spring suspension - rail: steel

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

The strongest system is a chain with no weak links. Eagle chain links have a smooth radius with no sharp edges or chamfers, which yield a significant reduction in noise, friction, and wear. This design also allows for a flatter plate for more consistent chain riveting and greater overall strength. It's also the biggest contributor to the ultra-smooth, precise, durable, and quiet performance found in the 10-50T cassette and X-SYNC 2 chainrings. Additionally, installation is made easy with a dedicated 12-speed Eagle quick link. - Groundbreaking new chain design and technology - The Eagle chain has been completely re-engineered and is produced with new manufacturing technology. - All-new Eagle Power Lock chain connector with FLOWLINK technology provides better chain-guiding and increased longevity - The Eagle chain is the quietest, strongest, and most wear-resistant chain in the world - Unique features and design also provide significantly improved wear resistance on Eagle cassettes and rings

An ultra-lightweight XC weapon. 32 Step-Cast's pioneering lower leg shape isn't just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. - Black anodized upper tubes - 32mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package

Shimano's Tiagra Front Derailleur (3x10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with cascaded technology from the top shelf Dura Ace line. - Model Number: FD-4703 - Series: Tiagra - Cassette Compatibility: 10 - Top Gear Teeth: 50T - Maximum Capacity: 20T - Chain Stay Angle: 63-66 - Chain Line: 45 - Band Mount: 28.6mm / 31.8mm (w/AdapterS) 34.9mm

• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter

The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

- Forged aluminum body - Chromoly spindle - Non-slip studs - Toe clip compatible - 529g per pair (9/16-inch)

Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes. - 0° Float/fixed type = SM-SH10 - 2° Float/front center pivoting type = SM-SH12 - 6° Float = SM-SH11

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

• Square taper interface • Only includes left crank

• Aluminum • CNC-finished

Profile's Boxers give you versatile hand positions for improved climbing and comfort. Made from lightweight 6061-T6 forged aluminum, the Boxers have outstanding strength and durability. The offset clamps provide secure clamping power and leave plenty of room on your bars.