Parts

Shimano Replacement pads for Road brake shoes - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type road brake pads fit models: Dura-Ace BR-9000, BR-9010, BR-7900, BR-7800, BR7700 Ultegra BR-6800, BR-6700, BR-6600, BR-6500 105 BR-5800, BR-5700, BR-5500 Non-Series BR-R600, BR-R561, BR-R560, BR-CX70s

This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks. - 26mm length - 12g - Designed to fit FSA cranks only - Includes M18 bolt, M27 self-extracting cap and washers

-Seatpost clamp for Propel Advanced models (2013-2016)

- Quick-release seatpost clamp w/rack mount

- Eva foam provides excellent vibration damping, reducing road buzz - Blended natural cork, helps absorb sweat and resists heat caused by friction - Includes end-plugs and finishing tape

64BCD chainring for MTB cranksets

This replacement bolt unit ensures your I-Spec II shifters, dropper levers, and/or brake levers are securely fastened. Make sure your controls are ready to rip.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

- Replaces existing top cap, and allows the use of a bottle cap as a decorative cover - Compatible with both twist off and crimped style bottle caps - Bottle cap is held in place by two strong magnets - Easy to switch out bottle caps - AL6061 alloy cap and AL7075 alloy bolt

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars. - Required for bar end use on Satellite Plus Isozone bars - For use with clamp style bar ends - Includes 2 adapters and 2 rubber handlebar inserts. - Bar end sold separately

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced carbon rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment

- One-piece bottom bracket cup set - Bearings included - Fits smaller american juvenile/youth sized BB - Shell: 65mm - Cup Material: Steel - Weight: 173 grams

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Z7 is a basic, affordable replacement chain for use on 6 and 7 speed bikes. - Features inner plate chamfering to smooth shifting - Z-bridge shape

- Upper pulley has larger teeth for increased chain control

Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only

- 5-speed freewheel - 14 – 28T

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

- Dust-proof and waterproof rubber seal cover. - Protect the power source connection on the frame when the e-bike is parked outside or when you carry it without the EnergyPak.

• Durable organic pad compound • Quiet and powerful braking performance for all weather conditions

A range of sturdy, affordable cogs is an essential part of a single speeder's quiver. Origin-8's Single Speed Cog is available in 13, 14, 16 and 18T sizes is chrome plated to resist rust and increase longevity. It's designed for Shimano/SRAM style cassette bodies and is made with splined, hardened chromoly steel. Now you can easily tailor your gearing for the terrain.

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

• Replacement hoods for road brake levers with traditional, non-aero cable routing • Soft, tacky rubber for a sure grip • Available in black or brown

Dimension classic 4-hole cruiser chainwheel, with offset to allow chainline adjustment. - Classic 4-hole cruiser chainwheel - Offset ring allows chainline adjustment - Polished steel - Fits 1-piece crankarms - Requires 1/2-inch x 1/8-inch chains

This is an FSA MegaExo Crank Arm Bolt for 19mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M12 bolt, M27 self-extracting cap, and washers

-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Kool-Stop's Campi 2000 insert pad was designed to fit Campagnolo systems made after the year 2000. Features: - Patented Plow Tip - Water Grooves - Dove Tail fit - Rim Friendly - Replacement pads for Campagnolo 10-speed groups Black: standard compound designed for dry condition riding Dual: combination of Salmon and Black compounds for more controlled, smoother stopping Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.

Compatible with most Shimano drivetrains, microSHIFT thumb tap shifters have durable bodies with ergonomic shift levers that make it easy to get bikes going again. - Include shift cables - Visible gear indicator

•Designed for cantilever & caliper brakes •22.2mm (7/8") clamp •Forged alloy construction •3 finger •Pulls two brake cables with one lever •136g each

• Aluminum • CNC-finished

- High Performance Brake Pads - Disc Pad Material: Organic

- Truvativ, Crank arm bolt, M12, Cromoly, Self-extracting for Howitzer, Bag of 2

-Seatpost clamp spacer kit for Advanced ISP models (2012-2014)

-Seatpost clamp for 2014 TCX Advanced models

- Melt forged aluminum construction - Coiled spring tension adjust

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level X-Series chains. - Includes KMC Missing Link I - Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting - Mushroom riveted pins for the highest pin power and allows shifting under heavy loads - Stretch Proof heat treatment so the chain last longer and goes farther - Half nickle plated - 1/2" x 3/32" - Weight: 286 gr

The MS25 twist shifter from microSHIFT is designed to be simple and easy to use. - Compatible with Shimano derailleurs - Left shifter is indexed

- Stainless steel die-pulled and polished super-slick gear cable with electrolysis coating - Electrolysis coating offers an ultra-smooth surface finish that greatly reduces friction for outstanding shifting performance - SRAM/Shimano compatible head for both MTB and Road applications - Extra-long 2800mm cable length - Use: Front or Rear - Diameter: 1.1mm

SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.

Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t

Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only

- Forged aluminum - 7/8-inch seat-clamp diameter - 165 grams

• Steel • Retainer ball bearings, includes top cap and star nut • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30

SRAM's SuperCork Bar Tape looks good and feels great. This light, stretchy tape is easily installed and adds a touch of class to any bike.

RockShox 28mm Seal Kit

• Converts Braze-on front Derailleurs to clamp on • Lightweight forged alloy • Weight: 28g

Converts braze-on front derailleurs to clamp-on. Available in multiple clamp diameters.

Origin-8's Pro Cork Handlebar Tape is made from real cork and features an adhesive backing. The tapered edge gives you a smooth, comfortable wrap that feels wonderful. And, you'll also get a set of handlebar plugs to finish the job.

- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs

Replacement seatpost clamps for a variety of frame and seatpost sizes.